Aviosys 9212 Delux - Manual (Page 12)

IP POWER 9212 USER MANUAL
VER. 1.10 - 11 -
lower than
200Ω when it shows ON and higher than 500Ω when it shows OFF.
2. When measuring the resistance of web contacts, the maximum voltage is 5V and the
maximum currency is no more than 10mA。
PS: magnetic reed switch: using the magnetic field of the magnet to produce a signal when there
is a movement happened in switch. Low cost and easy to use is the chief characteristic of
magnetic reed switch. Most of them are used in security equipment, living product and automatic
mechanism.
9202 Output Pro Hardware connection (recommend)
IP Power 9202 Output Pro has predefined Relay Statuses.
Outputs 1 - 4: Normal Closed Relay (NC)
Outputs 5 - 8: Normal Open Relay (NO)
(The relay status of the outputs cannot be changed: Meaning that Output 1-4 will always
be Normally closed and Outputs 5-8 will always be Normally Open )
Maximum Rated Voltage: 240V/AC, 60V/DC
Maximum Rated Currency: 12A AC/DC
Maximum rated voltage for Single relay : 24V/ 10A , 120V/ 10A , 250/ 7A
Maximum Switch time: Max 10ms
Environment Temperature: -30°C~ + 55°C
NOTICE: Only the professionals should operate the following operations in this section
and the common user DO NOT try it!
For an example using a Light bulb
1.) Use the electrical wire of the equipment：
Step 1 ： Cut off the live wire.（Use a test pencil or screwdriver with voltage tester to identify the
live wire between the two wires of electrical wire.）
NOTE: For this method you must cut off the electrical wire of the household appliance. Please
make the decision after reading method 5-2 and 5-3.