Avery Dennison Monarch 928 Stacker User Manual

Page 7

Text mode
Original mode

Getting Started 1-3

3. Align the stacker with the front of the knife.

4. Gently lift the stacker and center the guide tabs in the knife opening.

5. Set the stacker locating pins (on bottom of stacker) firmly in the mounting

plate holes.

Note: Height adjust bracket is only needed when

installing the stacker with a 938™ verifier.

M o u n t i n g p lat e h o le s

S t a ck er l o c a ti n g pi n

Note:

To avoid damage to the motor, the stacker rollers and the front of
the knife must not be in direct contact. If they are, lower the
stacker’s feet by turning them. Turn the nut to lock the feet in place.