Avery Dennison Monarch 928 Stacker - Manual (Page 17)

S e t t i n g t h e B e l t M o v e m e n t
You need to set the belt movement
 when you first get the stacker.
 when you switch to supplies that have a different thickness.
To set the belt movement:
1. Print a test batch of 50 tags or 25 RFID tags. Refer to your printer’s
Operator’s Handbook for instructions.
2. Move the tag weight away and remove the tags.
3. Stack the tags in your hand.
4. Hold the stack against the gauge on the tag weight. If you are using pre-
punched supplies, do not hold the pre-punched end of the stack against
the gauge.
The bar closest to the top of the stack is the number for the belt
adjustment.
T a g S a m p le s
5. Turn the belt adjustment knob to the number from the stack
measurement.
6. The stacker is now ready.
Note: If the tags are stacked too loosely or too tightly, see “ Adjusting the
Belt Movement ”.
Operation and Adjustments 2-7