Avery Dennison Monarch 928 Stacker - Manual (Page 18)

A d j u s t i n g t h e B e l t M o v e m e n t
You need to adjust the belt movement if the tags are stacked too loosely or
too tightly. When you see a stacking problem:
1. Press Pause to pause printing.
2. Empty the tray.
3. If the tags are too loose, turn the belt adjustment knob to the next lower
setting.
B e l t Ad j u s t m e n t
K n o b
4. If the tags are too tight or fan out, turn the belt adjustment knob to the
next higher setting.
5. Print a test batch of 50 tags or 25 RFID tags. Refer to your printer’s
Operator’s Handbook for instructions.
2-8 Operating Instructions