Avery Dennison Monarch 928 Stacker - Manual (Page 6)

U n p a c k i n g t h e S t a c k e r
After you unpack the stacker, you should have a 928 stacker, stacker
mounting plate, and power cord.
I n s t a l l i n g t h e S t a c k e r
In addition to the 928
 stacker, your printer could also have the 938
verifier. Always install the knife before the stacker or verifier. Then install
the verifier (if necessary) and then the stacker. The printer and all
accessories must be installed on a level surface.
To install the stacker:
1. Turn off the printer.
2. Attach the stacker mounting plate to the knife.
S t a ck er m o un t i n g pl a te
1-2 Operating Instructions