Avery Dennison Monarch 928 Stacker - Manual (Page 14)

4. Unlock the tag weight handle by turning the knob counterclockwise.
b a c kw ard
H a n d l e
2-4 Operating Instructions
5. Push the handle all the way backward for tags 1.6 inch or shorter;
forward for tags 1.6 inch or higher.
6. Tighten the knob.
7. Place the tag weight against the tag stop.
8. Print a test batch of 50 tags or 25 RFID tags. Refer to your printer’s
Operator’s Handbook for instructions.
9. Move the tag weight out of the way.
10. Adjust the guide rails to match the width of your tags by moving the
guides against the tags.
Note: Use two hands to move the guide rails and hold the rails on the ends
by the bar.
K n o b
f o rw ard
T a g S t o p
T a g W e i gh t
S l id e