Avery Dennison RFID - Manual (Page 42)

HowToRFID
Revision: 13 Date: 31 August 2009
Page 42 of 53
6 Applications / Examples
6.1 Hot spot test (UHF Technology)
Please note: the activation of the hotspot test via #RM command only supported in firmware version <= x.33.
Starting with X.34 version the test can be activated only via the menu.
Preparing the printer / print-job:
Set antenna offset to zero. Deactivate chip protection feature. Choose correct tag type (15)
Note: this is an example: Modify #IMSR for your label/tag needs. Especially label size.
sample job
#!A1
#IMSR102.0/155.0//15N/0/1/0
#ERN//
#RM0/0
#Q1#G
Please note: the hotspot test can also be initiated from the RFID parameters menu.
6.2 EPC class1 Gen2 features
6.2.1 Write / Read / Print EPC with 96bit (using variable data handling approach)
sample job
#!A1
#G-----------------------------------------------------------------------------------
#G specify material settings
#G-----------------------------------------------------------------------------------
#IMSR105/80//15N/38/3
#ER
#G-----------------------------------------------------------------------------------
#G Define variables
#G-----------------------------------------------------------------------------------
#G define your (static) EPC here using Hex ASCII encoding
#VDT/EPCDataWrite////3114F4DA34B2D05E01000000#G
#VDT/EPCDataVerify////#G