Avery Dennison RFID - Manual (Page 2)

HowToRFID
Revision: 13 Date: 31 August 2009
Page 2 of 53
Revision history
Revision Date Author Changes
N/A Before 2007 M. Leiblich Changes have not been tracked in the past
7 2007-12-19 R. Boettcher Layout and document structure reworked
Section RFID basics removed
Section EasyPlug command description limited to commands not already
described in the EasyPlug manual (part of the printer documentation)
8 2008-05-30 R. Boettcher Section 3.1.2.1: Power level data updated (EU and US module data included)
Section 3.3.2.2: AWID Module identification clarified
Section 3.3.2.1: AWID Firmware compatibility list updated (EU Module => 4.10B)
Section: 4.1.1: HF Technology EAS bit added
Section 5.3.5.3: #RFC command description for modifying the EAS bit added
Section 6.2.7: Sample job for EPC/EAN128 4x6” shipping label added
Section 6.3 added an example for modifying the EAS bit of HF tags
9 2008-06-26 R. Boettcher Various changes indicating differences between standard printer firmware with
RFID features and semi custom RFID firmware
New section 1 Summary of supported RFID features
New section 2.4.8 Processing failures (errors) – Bad tag signaling
Section 2.2: size limit of 224 bits user memory for NXP chip based tags removed
Section 3.3.2.1: size limit of 224 bits user memory for NXP chip based tags
removed
Section 3.1.2.1 Power level: power level tables and diagrams for AWID EU and
US RFID reader modules updated
Section 3.1.3 Parameters for error handling: description for parameter “Try
times” added
New section 3.1.5 Recommendations for web / material handling
New section 5.1.3 Operation / EasyPlug command matrix
Section 5: description of #SI command updated
Section 5: description of #RFL command added
Section 6: sample for usage of access password (EPC Gen 2 tags) updated
10 2008-08-21 R. Boettcher Adaptation of examples witch use PadLeft or PadRight functions to the syntax
documented in the EasyPlug manual and implemented in firmware versions >=
x.33 (first standard release with RFID). The syntax was changed compared with
previous semi custom releases!
Affected examples:
Section 6.2.3: Write / Read / Print EPC with consecutive numbering
Section 6.2.6: Writing a SSCC-96 to tag
Section 6.2.7: EPC/EAN128 shipping label (SSCC + SSCC-96) + automatic
transfer from Barcode SSCC (NVE) to EPC using a scanner
11 2008-09-01 R. Boettcher Section 1.2: Correction of Korea Frequency Range
Section 2.3: table Table 2 – Available RFID kits updated, added 64-08 UHF kits,
HF kits for DPM/ALX removed