Avery Dennison 6037 Rev.AC 9/03 - Manual (Page 23)

Converting Applications 5-5
You can also run the program from the DOS prompt
(PASSTHRU.EXE). The program is located in the C:\UTIL
directory.
E d i t i n g t h e R a d i o C a r d F i l e s
Make the following changes if the radio driver you are using has
these files.
File Change
CSALLOC.INI Remove 3 from any lines beginning with
IRQ=3,5, (resulting in IRQ=5, )
PROTOCOL.INI int=3 to int=5 or interrupt=3 to interrupt=5.
C o m p l e t i n g t h e P r o c e s s
Finally,
♦ Build a new disk image.
♦ Flash the printer.
♦ Test the application.