beautypg.com

Lokprint™ ii operation / adjustments – Avery Dennison LOKPRINT II User Manual

Page 16

background image

16 •••• LOKPRINT™ II Operation / Adjustments

Users Manual LOKPRINT™ II

LOKPRINT™ II Operation /
Adjustments

JAM SENSOR

Jam Sensor

The jam sensor (illustrated with the bridge removed) is looking for the presence of
the fabric for the printer to start and continue to operate. If the fabric in not present,
the system will not start and the printer front panel will display a message “Check
Stacker”. If the fabric breaks during operation and pulls out of the sensor, the system
will stop and printer front panel will again display “Check Stacker”. If the web sags
more than the feed can take up before the heat chamber moves to the run position, the
web may be pushed out of the jam sensor and stop the system.