Avery Dennison LOKPRINT II - Manual (Page 10)

10 •••• Unpacking / Inventory Users Manual LOKPRINT™ II
Unpacking / Inventory
Unpacking
The AVERY DENNISON equipment is shipped in a large cardboard box, which may
be difficult to move by hand.
DO NOT REMOVE THE MACHINE FROM THE BOX OR UNPACK IN
THE SHIPPING / RECEIVING DEPARTMENT.
NOTE: Unpacking in the shipping/receiving department is not recommended for the
following reasons.
First: The cardboard carton in which your AVERY DENNISON equipment was
shipped allows the machine to be moved with a forklift, forkcart or
handcart. Because of the weight of the machine, it is easier and safer to
use one of these devices to move the equipment to its intended
installation location.
Second: Leaving the machine in the carton while it is being moved within your
facility will help to protect the equipment during any movements to this
location. Once the equipment has reached its intended location you
should begin the unpacking process.
Open the carton from the top. Do not cut deep into the carton, as there are items
located just under the top. Remove the items located on the top insert. Remove the
top insert. Lift the machine onto the table with the two banding straps. Remove the
two straps and the plastic from the machine. Inspect the machine for shipping
damage. If damage is discovered, contact AVERY DENNISON for further
instructions - in the U.S.A. at (570) 888-6641. In other countries please contact your
local AVERY DENNISON supplier. Once you are satisfied that there was no
obvious shipping damage, the machine can now be moved to its intended location. In
some cases, a double box has been used to ship your machine.
Shipping Carton.
Save the shipping materials to relocate the equipment or return to factory for service.