File name conventions, Drive names – Avery Dennison Monarch 9864 Command Overview User Manual
Page 9

10/07 Rev. 4.02-01
MANUAL EASY PLUG
All
devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
File name conventions
Files which are referred to by an Easy-Plug command must be named
according to the following conventions. Those are the same rules which
were required by the MS-DOS operating system:
•
Maximum file length: 8 characters.
•
Allowed are alphanumerical characters (20
hex
up to 7E
hex
on the ASCII
table), which are:
-- The letters A-Z without country specific special characters
-- The numbers 0-9
•
Not allowed are the following characters: . / : < > + = ; , ? [ \ ] " * | and the
blank.
•
The file name may be supplemented by 3 characters. This extension is
separated from the file name by a decimal point.
Drive
names
Some commands require file access. The following drives letters are valid:
A:\ File access on internal RAM. Switching the printer off will delete all
data saved on the internal RAM!
C:\ File access on a CompactFlash card. Data saved on CompactFlash
card will not be deleted by switching the printer off.