Avery Dennison Monarch 9864 Command Overview - Manual (Page 10)

10/07 Rev. 4.02-01 MANUAL EASY PLUG
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
Easy Plug command groups
Notes and declarations
All commands marked with an "X" in the following overview apply to the
relevant group of printers.
The slashes (/) included in individual commands are mandatory.
Parameters can be ignored if they refer to non-existent printer operations
(e. g. optional cutter).
Parameter abbreviations are shown in small letters and are placeholders
for ASCII texts and ASCII numbers (e. g. num, int)
Most command results remain stored in the printer, even after the printer
has been switched off. The command results may overwrite settings
previously entered at the operating panel (e. g. material type, material
length, #BOF, #BON etc.).
All commands are temporarily stored in a queue and are then processed in
the order in which they have been received. Immediate commands are the
only exception (commands with exclamation marks).
P The complete command definitions, together with individual deviations for
special versions, can be found in the subject section
"Description of commands".
P The printer groups are included in paragraph
"General Information about Easy Plug" in this manual.