Avery Dennison Monarch 9416 XL Printer Equipment Manual - Manual (Page 6)

U n p a c k i n g t h e P r i n t e r
Keep all packaging material in case you need to move or return the printer. After you
unpack the printer, you should have a
♦ 9416 printer
♦ Power Supply
♦ Quick Reference
♦ CD-ROM that contains software and manuals.
If any items are missing, contact Monarch for replacement parts.
C o n n e c t i n g t h e P o w e r S u p p l y
Caution: Do not touch the electrical connectors while setting up the printer.
Electrostatic discharge can damage or destroy the printhead or electronic
components.
To connect the power supply:
1. Place the printer in a location that allows easy access to the front of the printer.
Note: Never operate the printer while it rests on its side or upside down.
2. Place the power supply in a suitable location, preferably on the floor, near an
electrical outlet.
3. Turn off the printer. Press the switch on the back of the printer to the OFF
position (O).
4. Plug the three-hole end of the AC adapter cable into the three-pronged outlet in
the power supply.
5. Plug the round end of the power supply cable (labeled “printer”) into the socket at
the back of the printer.
6. Plug the three-pronged end of the
AC adapter cable into a grounded
electrical outlet.
WARNING: The printer and power
supply should never be
operated in a location
where either one can get
wet. Personal injury
could result.
1-2 Equipment Manual