beautypg.com

Cleaning the platen roller and printer, Cleaning the platen roller and printer -3 – Avery Dennison Monarch 9416 XL Printer Equipment Manual User Manual

Page 21

background image

C l e a n i n g t h e P l a t e n R o l l e r a n d P r i n t e r

To clean the platen roller:

1. Turn off the printer.

2. Press the cover release levers towards the front of the printer to release the cover.

3. Lift open the cover.

5.

Moisten a cotton swab with isopropyl alcohol and run the cotton swab across the
platen roller.

6.

Turn the platen roller with your finger and make sure it is clean all the way around.

Note: Do

not remove the platen roller.

Platen Roller

4. Allow the platen roller to dry for one minute before you close the cover and

resume printing.

5. Slightly dampen a cloth with water and wipe the printer’s exterior surfaces clean.

6. Use a dry, soft-bristled brush to clean paper dust out of the printer’s interior. Do

not clean the inside of the printer with a damp cloth. Do not clean while the
printer is on. Do not use household cleaners to clean the printer.

Care & Maintenance 3-3