Loading labels for peel mode, Loading labels for peel mode -5 – Avery Dennison Monarch 9416 XL Printer Equipment Manual User Manual

Page 13

13. Press the FEED button. The indicator light should be GREEN.

14. Calibrate the supply, if necessary. See “

,” for more

information.

L o a d i n g L a b e l s f o r P e e l M o d e

Peel mode separates the label from the backing paper while printing.

Note: The minimum label length for peeling is 0.75- inches (19 mm). Hold the

leading edge of peeled labels when printing on supply longer than six inches.

1. Press the cover release levers (located on each side of the printer) towards the

front of the printer to release the cover.

2. Lift open the cover.

3. Pull out the peel door located on the front of the printer to display the peel roller

and the peel bar.

Peel Door

Peel Bar

Peel Roller

Loading Supplies & Printing 2-5