Argox F1 - Manual (Page 52)

52
Setup Mode
You can set printer parameters for your application directly by using the control
panel LCD and buttons.
Enter Setup Mode
1. Press
2. Use the left or right button to scroll through the parameters.
Enter Special Setup Mode
Special setup mode is the menu that lets you set up the language and change
password.
1. Press the
2. Use the left or right button to scroll through the parameters.
How to Leave Setup Mode
1. Press
The printer displays SAVE CHANGES and activates the button.
2. The following table shows three options for leaving the setup mode.
Option Description
Save Changes Press to save changes and exit
setup mode.
Reject Changes Press the up <
↑> and down < ↓> buttons to
select
“NO”, and press . The printer
rejects changes and exits setup mode.
Return to Setup Mode  Press
parameter.
 Press the left < ←> button to return to the
previous parameter