AMETEK XFR 2800 Watt Series - Manual (Page 54)

Local Operation
3-2 TM-F2OP-C1XN-01
Introduction
Once you have installed the power supply and have connected both the
AC input power and the load as covered in Chapter 2, “Installation”, the
power supply is ready to operate in local control mode (that is, operation
at the unit’s front panel).
• See “Standard Operation” on page 3–3 for a brief explanation of
Constant Voltage and Constant Current Mode operation and see
page 3–7 to page 3–17 for more about power supply functions such as
over voltage protection, shutdown function, over temperature
protection, and using multiple supplies.
• See “User Diagnostics” on page 5–9 for troubleshooting information
for the operator.
• Turn to Chapter 4, “Remote Operation” for descriptions of remote
programming options and remote monitoring of the power supply.