Adtec digital eyeMonitor - Manual (Page 9)

7 Chapter 2 - Getting Started
Initial Setup
Launch eyeMonitor by double-clicking the icon on the desktop or
browse to Start > All Programs > Adtec > eyeMonitor. You will be
prompted to complete the Initial Setup.
TBGS
If installing eyeMonitor on the TBGS, you will need to confirm that
the Installing on Server check box at the top of the Data Sources
pop-up IS checked. This will fill the input boxes with the default
Computer Name and Default Path. Click on the Save button to save
these settings. (Figure 2.2)
Figure 2.2
You will be asked to restart
eyeMonitor for these
setting to take effect.
Relaunch eyeMonitor and
you will be asked to login
using your username and
password. (Figure 2.3)
Figure 2.3
Client PC
If you are installing eyeMonitor on a Client PC, you will need to
make sure that the Installing on Server check box IS NOT checked
at the top of the Data Sources pop-up and then enter the correct
information for the IP Address/Computer Name and the Data Path for
the TBGS. (Figure 2.4)
The IP Address is the address given to the TBGS. Do not include
any leading or trailing back slashes when entering the address. See
example below. If you do not enter this address correctly, you will not
be able to login to the database once you restart the application, but
will be prompted with this window again.
The Data Path is the mapped network drive to the TBGS. In the
event that you enter the TBGS Data Path incorrectly or you loose
connectivity to your mapped network drive, you will receive a
message stating that the Data Path does not exist. If this is the
case, you will need to confirm that your network drive is correctly
mapped and then re-establish the data path connection from within
the eyeMonitor application by going to Configure >Data Sources. See
Chapter 3 - Configuring eyeMonitor for more detail.
Click on the Save button to save these settings and then relaunch
eyeMonitor.
Figure 2.4
If the TBGS data folder is not mapped correctly, you will experience
the following issues.
You will be unable to view verification files.
The Encode List Report will show all content as missing.
The Missing Content Report will not show MVL status
You will not be able to access merged schedules for Scheduled Spot Replace.
The Schedule Report will not display schedules status correctly and you will
not be able to view schedules.