Adtec digital eyeMonitor - Manual (Page 15)

13 Chapter 3 - Configuration
To change a color for a specific event or condition, select Color
Configuration from the Configuration menu. Locate the condition you
wish to set the color for and click on it’s corresponding color box. A color
selector will appear. Select your preference and click OK.
Once you have completed your color choices, click on Save to save
and close the configuration window. To restore your color selections to
their default settings, you will need to click on the “Defaults” button and
then the Save button. For a full explanation of the events listed on the
Color Configuration screen see Appendix E , Verification Status Codes.
Scrolling Options:
When viewing eyeMonitor, you can select whether or not you
wish to view each headend panel as an individual scrolling window
or if you want the ability to scroll all headend panels at once. To set
your preference, go to Configuration > Scrolling Options and select
Individual Scroll or Scroll All.
Grid Tiling Options:
Grid Tiling allows you to select either horizontal or vertical tiling
of headends within the monitor window. Horizontal Tiling will stack the
headends one on top of another. Vertical will place them in a row side-
by-side.
Channel Tiling:
Select the preferred orientation of the channels within each
headend. Horizontal will list the channels vertically in the left-most
column, and the break content for that channel a horizontal row.
Vertical will list the channels horizontally across-the-top and the break
content of each channel in a vertical column.
Note: The typical setup is for Grid Tiling to be set to Horizontal and
Channel Tiling to Horizontal. This setup allows you to see more breaks
at one time. (Figure 2.5)