Adtec digital RD-30 (version 2.1.1) Manual - Manual (Page 5)

○ If the product has been dropped or damaged in
any way.
○ The product exhibits a distinct change in
performance.
● Replacement Parts: When replacement parts are
required, be sure the service technician uses
replacement parts specified by Sencore, or parts
having the same operating characteristics as the
original parts. Unauthorized part substitutions made
may result in fire, electric shock or other hazards.
to its normal operation.
Safety Warnings and Cautions
There is always a danger present when using electronic equipment.
Unexpected high voltages can be present at unusual locations in defective equipment and signal distribution systems. Become
familiar with the equipment that you are working with and observe the following safety precautions.
For your safety and the proper operation of the device:
● Every precaution has been taken in the design of the product to ensure that it is as safe as possible. However, safe
operation depends on you the operator.
● Always be sure your equipment is in good working order. Ensure that all points of connection are secure to the chassis
and that protective covers are in place and secured with fasteners.
● Never work alone when working in hazardous conditions. Always have another person close by in case of an accident.
● Always refer to the manual for safe operation. If you have a question about the application or operation call Adtec for
assistance.
● WARNING – To reduce the risk of fire or electrical shock never allow your equipment to be exposed to water, rain or high
moisture environments. If exposed to a liquid, remove power safely (at the breaker) and send your equipment to be
serviced by a qualified technician.
● To reduce the risk of shock the product must be connected to a mains socket outlet with a protective earthing
connection.
● The mains plug is the main disconnect and should remain readily accessible and operable at all times.
10.29.14- v2.1.1