Adtec digital RD-30 (version 2.1.1) Manual - Manual (Page 32)

Appendix B - Technical Specifications
Base Model (RD30-01)
Inputs
DVB-ASI Input
Use: Input available for decode.
Standard: Asynchronous Serial Interface per EN500083-9
Input TS Rate: 250 Kb/s to 200 Mb/s
Packet Size: 188/204 byte
Connector: BNC (75 Ohm)
IP Input
Use: Input available for unicast/multicast decode. TS input/output can share the same connector as required.
Standard: UDP or RTP
Supports 1 to 7 TS packets per IP packet
IGMP v1, v2 and v3 support
Input TS Rate: 250 Kb/s to 200 Mb/s
Connection speed: GigE (10/100/1000 Auto-Negotiate)
Receiver capability: 2 simultaneous MPEG over IP transport streams
Connector: x2 RJ45
Outputs
SD-SDI / HD-SDI
Two mirrored SDI outputs from Decoder
Standard: Video & Audio SMPTE 259M - SD, SMPTE 292M - HD
Up to 8 Channels of Embedded audio
SDI Ancillary support for:
Closed Captioning (CEA-708), AFD (SMPTE 2016), OP-47 (SMPTE RDD-08), SMPTE RDD-11, SCtE 127 (SMPTE 2031), EN301775 (SMPTE
2031), Time Code (SMPTE 12M-2)
10.29.14- v2.1.1