Maintenance – Adtec digital RD-30 (version 2.1.1) Manual User Manual
Page 15
1
Locate the AC power cord that was included with the RD-30.
2
Plug the female end of the power cord (end with no prongs) into the back of the
unit.
3
Locate a protected outlet (usually inside of the rack) to plug the male end of the
power cable into.
Maintenance
The RD-30 is virtually a maintenance-free piece of equipment. There are no user serviceable parts on the inside of the unit.
10.29.14- v2.1.1
See also other documents in the category Adtec digital Video:
- DPI-1200 (version 01.04.08U) Quick Start (2 pages)
- DPI-1200 (version 01.04.08U) Manual (58 pages)
- mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages)
- mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (67 pages)
- mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (68 pages)
- mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages)
- mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages)
- EN-80 (version 2.02.28) Quick Start (2 pages)
- EN-30 (version 1.02.02) Manual (59 pages)
- RD-30 (version 2.1.1) Quick Start (1 page)
- mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages)
- mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages)
- mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages)
- YUV2QAM (version 01.02.01) Manual (46 pages)
- Soloist-HD Pro (version 02.07.09) Manual (77 pages)
- EN-91 / EN-91P (version 1.02.29) Quick Start (2 pages)
- DTA-3050 (version 6.02.14) Manual (94 pages)
- EN-20 (version 2.03.06) Manual (63 pages)
- mediaHUB-HD Pro (version 03.07.19) Studio Encoder Quick Start (2 pages)
- RD-60 (version 1.13.02) Quick Start (2 pages)
- edje-5110 (version 01.02.05) Manual (98 pages)
- eyeMonitor (42 pages)
- TBGS w/adManage (50 pages)
- Soloist 4111 (version 02.07.03) (1 page)
- EN-40 (version 2.02.24) (2 pages)
- mediaHUB (version 02.00.13) (24 pages)
- edje-5110 (version 01.02.05) Quick Start (2 pages)
- MAS & iptvManage (44 pages)
- AVS2 (5 pages)
- mediaHUB-HD 422 (version 1.01.10_M_2) Manual (104 pages)