Adtec digital RD-30 (version 2.1.1) Manual - Manual (Page 35)

DVB-S/S2 model with active LNB 19V @ 500ma and active CAM adds: 10-12W
Operational
- Ambient operating temperature: 0C to 50C.
- Ambient storage temperature: -40C to 65C.
- Non-condensing relative humidity range: < 95%
Certification / Compliance
RoHS Compliant
DVB-S/S2 Model (RD30-01-LB)
The LB option is a hardware option. This unit contains the same features as RD30-01 model listed above plus:
Inputs
DVB-CI Descrambling module
Interface: Adds two DVB-CI CAM slots
Use: Descrambles decoded service only without purchase of RD30-CAM-KEY. RD30-CAM-KEY provides up to maximum amount of decryptable
services supported by CAM module.
DVB-S/DVB-S2 tuner
note: Software key required to unlock full hardware support.
Use: Four switched L-Band inputs available for decode
Connector: F Type, Female
DVB-S EN 300 421 and DVB-S2 EN 302 307
Modulation Scheme support: QPSK / 8PSK / 16APSK / 32APSK
DVB-S2 symbol rate range: 1 - 45Msym/s
DVB-S symbol rate range: 1 - 45Msym/s
frequency range: 950 - 2150MHz
LNB Power and Control:
0, 13, 14, 18 and 19VDC @ 450mA
22kHz (band selection according to universal LNB for ASTRA satellites)
VCM Demodulation Support
10.29.14- v2.1.1