Dukane Projector 976SX - Manual (Page 86)

86
SECURITY menu
Item Description
PRESENTATION
(continued)
MULTI PC
MODE
(continued)
• To change from Single PC
mode to Multi PC mode, press ►
button to choose OK in the
dialog and press the ENTER or
INPUT button.
The display mode is changed.
• For details on how to switch the display mode to Multi
PC mode on your computer, refer to the manual for
“LiveViwer”.
• The Presenter mode setting of the selected
computer becomes valid when the display mode is
changed to Single PC mode. Also, the Presenter
mode setting becomes invalid when the display mode
is changed to Multi PC mode, regardless the setting
on the computers.
For details, refer to the manual for “LiveViewer”.
DISPLAY
USER NAME
Selecting this item displays the user name. This
function helps you identify from which computer the
current image is sent.
• You can set a user name for each computer on
“LiveViwer”. For details, refer to the manual for
“LiveViewer”.
SERVICE
Executing this item restarts and initializes the network functions.
Choose the NETWORK RESTART EXECUTE using the button ►.
Then use the button ► to execute.
Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting NETWORK RESTART EXECUTE, NETWORK menu
may not be controlled approx. 30 seconds.