Dukane Projector 976SX - Manual (Page 27)

27
Operating
Selecting an aspect ratio
 For a computer signal
8970, 8971:
NORMAL  4:3  16:9  16:10
8972W, 8973W, 8972WA, 8973WA, 8976SX,
8974WU, 8975WU:
NORMAL  4:3  16:9  16:10  NATIVE
 For a video signal, s-video signal or component video signal
8970, 8971:
4:3  16:9  14:9
8976SX:
4:3  16:9  14:9  NATIVE
8972W, 8973W, 8972WA, 8973WA, 8974WU,
8975WU:
4:3  16:9  16:10  14:9  NATIVE
 For an input signal from the LAN, USB TYPE A or USB TYPE B ports, or
if there is no signal
8970, 8971, 8976SX: 4:3 (fixed)
8972W, 8973W, 8972WA, 8973WA, 8974WU,
8975WU: 16:10 (fixed)
1. Press ASPECT button on the remote control.
Each time you press the button, the projector switches
the mode for aspect ratio in turn.
 For an HDMI TM signal
8970, 8971:
NORMAL  4:3  16:9  16:10  14:9
8972W, 8973W, 8972WA, 8973WA, 8976SX,
8974WU, 8975WU:
NORMAL  4:3  16:9  16:10  14:9  NATIVE
ASPECT
button
• ASPECT button does not work when no proper signal is inputted.
• NORMAL mode keeps the original aspect ratio setting.
NOTE