beautypg.com

Dukane Projector 976SX User Manual

Page 124

background image

124

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

Neither sounds

nor pictures are

outputted.

(continued)

The projector does not recognize the USB storage

device inserted into USB TYPE A ports.

Use the REMOVE USB function first, remove the USB

storage device, and then insert it into the port again.

Before removing the USB storage device, be sure to use

the REMOVE USB function on the Thumbnail screen,

which appears when the

USB TYPE A is selected as the

input source.

12, 97

Sound does not

come out.

The signal cables are not correctly connected.

Correctly connect the audio cables.

10 ~ 14

The volume is adjusted to an extremely low level.

Adjust the volume to a higher level using the menu

function or the remote control.

25, 57

The AUDIO SOURCE/SPEAKER setting is not correct.

Correctly set the AUDIO SOURCE/SPEAKER in AUDIO

menu.

57

The mode selected for HDMI AUDIO is not suitable.

Check each of the two modes provided and select the

suitable one for your HDMI

TM

audio device.

58

The Sound button (♪) or checkbox is disabled.

If you have selected

USB TYPE A, turn the sound on

from the Thumbnail menu.

If you have selected

USB TYPE B, remove the check

mark from the Sound checkbox in the Options window of

“LiveViewer Lite for USB”.

If you have selected

LAN, remove the check mark from

the Sound checkbox in the Option menu of “LiveViewer”.

97, 112

No pictures are

displayed.

The signal cables are not correctly connected.

Correctly connect the connection cables.

10 ~ 14

The brightness is adjusted to an extremely low level.

Adjust BRIGHTNESS to a higher level using the menu

function.

44

The computer cannot detect the projector as a plug

and play monitor.

Make sure that the computer can detect a plug and play

monitor using another plug and play monitor.

10

The lens shade is closed.

Check whether the

SHADE indicator is blinking. If it is

blinking, press

SHADE button on the control panel.

36

(continued on next page)