Dukane Projector 976SX - Manual (Page 25)

25
Operating
Operating
1.
Adjusting the volume
Use the VOL + / - buttons to adjust the volume.
A dialog will appear on the screen to aid you in
adjusting the volume. If you do not do anything,
the dialog will automatically disappear after a few
seconds.
• When is selected for current picture input port, the volume
adjustment is disabled. Please see AUDIO SOURCE item of AUDIO menu (57).
• Even if the projector is in the standby mode, the volume is adjustable when
both of the following conditions are true:
- An option other than is selected for AUDIO OUT STANDBY in the AUDIO
SOURCE item of the AUDIO menu (57).
- NORMAL is selected in the STANDBY MODE item of the SETUP menu (56).
1.
Press AV MUTE button on the remote control.
The BLANK screen will be displayed instead of
the screen of input signals and the sound from the
internal speakers will be muted. Please refer to the
BLANK item in SCREEN menu about the BLANK
screen (59).
To exit from the AV MUTE mode and restore the screen and audio, press AV
MUTE button again.
Temporarily turning off the screen and audio
►If you wish to have a blank screen while the projector's lamp
is on, use the AV MUTE function above or the lens shade function (36). Taking
any other action may cause the damage on the projector.
CAUTION
VOL + / -
buttons
AV MUTE
button
NOTE
• The projector automatically exits from the AV MUTE mode when
some control buttons are pressed.
NOTE