Dukane Projector 976SX User Manual
Page 24
24
1.
Make sure that the power cord is firmly
and correctly connected to the projector
and the outlet.
Turning on the power
2.
Make sure that the
POWER indicator is
lighted in steady orange (120). Then
remove the lens cover.
3.
Press
STANDBY/ON button on the projector
or the
ON button on the remote control.
The projection lamp will light up and
POWER indicator will begin blinking in
green. When the power is completely on, the indicator will stop blinking and
light in steady green (120).
Power on/off
To display the picture, select an input signal according to the section
Selecting an
input signal (26).
►A strong light is emitted when the projector’s power is on.
Do not look into the lens of the projector or look inside of the projector through
any of the projector’s openings.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
WARNING
1.
Press the
STANDBY/ON button on the projector or the STANDBY button on
the remote control.
The message “Power off?” will appear on the screen for about 5 seconds.
Turning off the power
2.
Press the
STANDBY/ON or STANDBY button again while the message
appears.
The projector lamp will go off, and the
POWER indicator will begin blinking
in orange. Then the
POWER indicator will stop blinking and light in steady
orange when the lamp cooling is complete (120).
3.
Attach the lens cover, after the
POWER indicator turns to steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
• Turn the power on/off in right order. Please power on the projector
prior to the connected devices.
• This projector has the function that can make the projector automatically turn on/
off. Please refer to the DIRECT POWER ON (66) and AUTO POWER OFF (66)
items of the OPTION menu.
NOTE
Power on/off
POWER indicator
ON button
STANDBY button
STANDBY/ON button