Xtramus NuStreams-P9M V2.1 - Manual (Page 7)

7
1.3. NuStreams-P9M Panel Functions Overview
NuStreams-P9M’s LEDs, buttons, and interface ports are located on its Front, Left and Right Side
Panels.
Front Panel
System Status & Testing Result Feedback Interface
LCD 4 x 20 characters LCD that display system information, status, and menu
System ¾ Power: Power ON ¾ SYS: System ready ¾ USB: USB connection status
¾ Link/Act: Connected with DUT WAN port ¾ 10M: 10 Mbps connection linked ¾ 100M: 100 Mbps connection linked
WAN ¾ Static IP: Using static IP as router WAN
connection ¾ DHCP: Using DHCP as router
WAN connection
Test ¾ Pass: DUT passes the test ¾ Fail: DUT does not pass the test
¾ || Pause: Pause current running test ¾ ► Run 2: Test Task of Run 2 is running
Hotkey
¾ ► Run 1: Test Task of Run 1 is running ¾ ► Run 3: Test Task of Run 3 is running
LAN Link/ACT NuStreams-P9M’s LAN ports are connected to DUT’s (switch or router) LAN ports. LAN LED 0~7 will be on accordingly
LEDs
STEP NuStreams-P9M’s testing process includes 4 steps. STEP LED 1~4 will show the testing process accordingly
Configuration Buttons (Left Side) Operation Buttons (Right Side)
Enter main menu, return to the previous menu, or cancel the
changes you’ve made
|| Pause Pause the test that is currently running
▲/+ Move selection cursor up or change test parameters ► Run1
Start Run 1 test. Up to 4 tasks can be configured in each Run
hotkey. Press this button and all tasks stored within will start
▼/- Move selection cursor down or change test parameters ► Run2 2 nd hotkey as above
Enter selected menu or apply the changes you made ► Run3 3 rd hotkey as above
Note: For more information regarding to NuStreams-P9M’s LED status, please refer to “1.4. NuStreams-P9M LED Status”.
XTRAMUS TECHNOLOGIES
®
E-mail: [email protected]
Website: www.Xtramus.com