Xtramus NuStreams-P9M V2.1 - Manual (Page 41)

41
NuStreams-P9M’s LCD will show the firmware/FPGA upgrading process as shown in the figures down
below.
NuStreams-P9M Firmware Upgrading FPGA Upgrading
Firmware/FPGA upgrading complete! Click OK to
finish. You will have to click the Reconnect button
on NuStreams-P9M’s Quick Launch
Button in order to re-establish the connection
between your PC and NuStreams-P9M.
If you’re upgrading FPGA, please reboot
NuStreams-P9M by switching its power off, and
turning it back on.
XTRAMUS TECHNOLOGIES
®
E-mail: [email protected]
Website: www.Xtramus.com