Xtramus NuStreams-P9M V2.1 - Manual (Page 38)

38
Test Traffic
• Protocol Type: You can set the protocol used (HTTP,
UDP, or FTP) for DUT tests. • Test Utilization (%): Utilization is the traffic flow ratio of
network, presented in percentage (1~99).
• Packet Length: The length of test packets (from
64~1600 Bytes) transmitting by NuStreams-P9M. • Test Time: The duration of time for DUT test.
• Learning Time: NuStreams-P9M will start sending learning packets to the DUT. The DUT will record the MAC
addresses of these packets, and learn the routing to NuStreams-P9M.
Pass/Fail Criteria
• Loss Tolerance (pkts): The acceptable number of lost
packets in data transmitting during tests (0~9999). • Excess Tolerance (pkts): The acceptable number of
excess packets in data transmitting during tests
(0~9999).
Apply Run
• Click this button to apply all the settings you’ve made and save the settings to NuStreams-P9M.
XTRAMUS TECHNOLOGIES
®
E-mail: [email protected]
Website: www.Xtramus.com