Xtramus NuStreams-P9M V2.1 - Manual (Page 44)

44
5. NuPAD
NuPAD is an assistant extension keypad, especially designed for running
tests at mass production line.
With all test parameters set and stored in NuStreams-P9M, NuPAD
allows users to perform tests without changing pre-set parameters.
5.1. NuPAD Control Buttons & LCD
A Connection Port Connecting NuPAD with NuStreams-P9M’s Console Port.
B LCD Screen Displaying system information, status, and test results.
C Control Buttons ¾ || Pause: Press this button to pause the current running test. Press
this button again to resume the test.
¾ ■ Stop: Press this button to stop the current running test.
¾ ► Run: Press this button to start test.
D/E System LEDs ¾ Sys/Link/Alarm: Showing NuPAD running status.
¾ Power: When NuPAD is connected to NuStreams-P9M’s Console
Port, the Green Power LED will be ON.
¾ Pass/Fail: If the test passed, the Pass/Fail Green LED will be ON; if
the test failed, the Pass/Fail Amber LED will be ON.
¾ Step 1~4: Showing the progress of the test.
XTRAMUS TECHNOLOGIES
®
E-mail: [email protected]
Website: www.Xtramus.com