Xtramus NuApps-MultiUnits-RM Ver1.5 - Manual (Page 53)

C. Traffic
You can make Up Stream and Down Stream packet transmitting settings for all the Active Ports that’s
used for 1 to Many-UC test here. The configuration for Up Stream (Member to Root) and Down
Stream (Root to Member) are identical, and can be related, as shown in the figure down below:
You can configure all the settings for each Active Port listed in Up Stream or Down Stream field in a
one-by-one manner by double-clicking the column you would like to configure.
You can also click the Quick Setup button. A
Quick Setup window will pop up. The settings
you made here will apply to all the Active Ports
listed in the Up Stream or Down Stream field.
53
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®