One to many unicast test (1 to many-uc), Unicast test (uc) – Xtramus NuApps-MultiUnits-RM Ver1.5 User Manual
Page 12
1.2. Function Description_ Performance Task in Layer 2 (PT2)
Built-in tasks in NuApps-MultiUnits-RM include Unicast, Flow Control, Broadcast, Filter tasks and
CRC error.
1.2.1. One to Many Unicast Test (1 to Many-UC)
One to Many Unicast Full Performance Test, performing layer 2 MAC address Unicast performance tests
from one source to multiple ports with different media types (such as 100Mbps and 1000Mbps Full).
1.2.2. Unicast Test (UC)
Unicast transmission is the sending of information packets to a single destination. In layer 2 test, unique
MAC address is the key of single destination as illustration below.
Perform unicast test on DUT in layer2 with different speeds, mode and various configurations.
•
PT2-UC-10H (10Mbps Half Duplex)
•
PT2-UC-10F (10Mbps Full Duplex)
•
PT2-UC-100H (100Mbps Half Duplex)
•
PT2-UC-100F (10Mbps Full Duplex)
•
PT2-UC-1G (1000Mbps Full Duplex)
•
PT2-UC-10G (10G Full Duplex)
12
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES
®