Xtramus NuApps-MultiUnits-RM Ver1.5 - Manual (Page 32)

3.3.3. Status Window
Status Window
FAB Shows the fabrication note.
Station Shows the testing station.
Operator ID Shows the user’s ID.
DUT Shows the Device Under Test.
Note Shows the pre set notes.
ModelName Shows the name of the model you set for the test.
Pass The number of the pass window task.
Fail The number of the fail window task.
Pass rate The rate results from the total pass window task.
Start time Shows the starting operation time based on the time clock of your PC.
Duration Shows the time spent since the Start time.
32
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®