1 to many-uc, A. port map – Xtramus NuApps-MultiUnits-RM Ver1.5 User Manual
Page 50

Test Tasks – Layer 2
All the Layer 2 tasks settings can be set here. For available Layer 2 tasks and their descriptions, please
refer to “1.2. Function Description_ Performance Task in Layer 2 (PT2
)
.”
5.1. 1 to Many-UC
1 to Many-UC is a Unicast Full Performance Test. Performing Layer 2 MAC address Unicast performance
tests from one source to multiple ports with different media types (such as 100Mbps and 1000Mbps Full).
A. Port Map
Before making any other configurations for 1 to Many-UC test, you have to assign a Root Port and its
Member Ports first.
To assign an Active Port as the Root Port,
please click the Available Port you would like to
use as a Root Port, and then click the Æ button
to add it to the Root Port field located on the
right side. To remove the Root Port you’ve
assigned, click the Å button.
50
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES
®