Xtramus NuApps-MultiUnits-RM Ver1.5 - Manual (Page 11)

1. NuApps-MultiUnits-RM Overview
1.1. General Description of NuApps-MultiUnits-RM
NuApps-MultiUnits-RM is a utility software that displays up to 8 independent windows in 1
user interface, where each window can run different settings with an independent DUT
(Device Under Test). The NuApps-MultiUnits-RM supports all XM-RM module cards and
can reserve the XM-RM module card’s ports on each testing window, where the testing result of each
window can be showed separately on a log file.
NuApps-MultiUnits-RM is designed for Xtramus Technologies XM-RM series module cards. The table
down below contains the XM-RM module cards, FPGA/Firmware/PROM versions that are supported by
NuApps-MultiUnits-RM.
Module Cards Support NuApps-MultiUnits-RM
Module Card FPGA Version Firmware Version
XM-RM661/671/681 V4.0b010 V1.7b032
XM-RM751/761/781 V4.0b010 V1.7b032
XM-RM731 V3.0b011 V1.7b032
XM-RM881 V2.1b006 V0.9b046
XM-RM881-2 V2.1b003 V0.9b046
XM-RM891 V2.0b003 V1.7b032
＊ Note: NuStreams-2000i and NuStreams-600i are required as well.
Also, please make sure that your PC meets the requirements listed in the table down below before
installing NuApps-MultiUnits-RM.
OS Windows XP Windows Vista/Windows 7
RAM 512MB RAM 1GB RAM
CPU Pentium 1.3Ghz or higher
HDD 10 GB Available Space
＊ Note: Large amount of data will be generated while running NuApps-MultiUnits-RM. It
is recommended to preserve enough available Hard-Disk space to store these data.
11
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®