Tempest Cyclone - Manual (Page 40)

Cyclone Enclosure User Manual
page 40
b. Slide the projector foot clamps in place over the projector feet and tighten the bolts
through the projector tray slots to secure in place.
10. Return the projector tray to the enclosure and lock the two slide bolts in place.
Airflow Chimneys
Certain projectors in certain enclosure types require additional airflow deflectors, baffles or chimneys
to direct the projector’s exhaust air towards the exhaust fans/duct and prevent recirculation and
overheating.
These parts will be supplied as needed with your enclosure, and are generally mounted either on the
enclosure frame or the projector tray. If they are not included, they should not be needed.
Christie Roadster Projectors
Cyclone 8200 enclosures for Christie Roadsters are supplied with a special airflow chimney that
clamps to the lamp door at the back of the projector. The lamp door may still be opened for
relamping without having to remove the airflow chimney. The Chimney will be packed inside the
enclosure for shipping.
Christie Roadster/J-Series
14-22K Lamp Door
Cyclone 8200 Airflow
Chimney clamps to
projector lamp door
Mounting clamp secures with
two screws through top