Tempest Cyclone - Manual (Page 37)

Cyclone Enclosure User Manual
page 37
5 Mounting the Projector
IMPORTANT! READ THIS FIRST

For safety, this must be done by two or more people.

IMPORTANT: The projector enclosure MUST be securely mounted BEFORE you attempt to
install the projector.

The enclosure must be horizontal for projector mounting and projector service. If the
projection angle is NOT horizontal, a Cyclovator Tilt Kit should be used, and the projector
returned to horizontal for projector mounting and service.
1. Cyclone enclosures may be provided with front or rear projector slides (the projector tray slides
out of either the front or rear of the enclosure), to customer order.
2. Depending on the projector type and orientation, your mounting method may differ.
a. Generally, the projector stands on the projector tray, and is bolted through slots from
below to lock in place.


Projector Tray
Slide Bolt (x 2)
Projector Bolt, flat
washer, spring washer.
Type and quantity vary
by projector.
Projector Bolt
Slots allow
front/back
adjustment
Projector Tray.
Slides are rated
@ 500lb/227kg.