Dell 3 User Manual

Page 208

206

Troubleshooting

.co

ll.c

Configuration
of NVRAM and
drives
mismatch. Run
View/Add
Configuration
option of PERC
3 BIOS
Configuration
Utility.

Press any key
to run the
Configuration
Utility.

The configuration

stored in the PERC 3

adapter does not

match the

configuration stored in

the drives.

Press to run

the BIOS Configuration

Utility. Choose Configure

—

View/Add Configuration

to examine both the

configuration in non-volatile

random access memory

(NVRAM) and the

configuration stored on the

hard drives. Resolve the

problem by selecting one of

the configurations.

Unresolved
configuration
mismatch
between disks
and NVRAM on
the adapter
after creating
a new
configuration

Some legacy

configurations in the

drives cannot be

cleared.

Clear the configuration.
Low-level format the related

drives and re-create the

configuration.

1 Logical Drive
Failed

A logical drive failed

to sign on.

Make sure all physical drives

are properly connected and

are powered on. Run the

BIOS Configuration Utility

to find out if any physical

drives are not responding.

Reconnect, replace, or

rebuild any drive that is not

responding.

TBBU Cache-data
seems to be
INVALID for
current
adapter.

The data on the

transportable battery

backup (TBBU) unit is

not valid for the

current controller.

Power off and put the TBBU

on the proper adapter. Or if

you want to discard the

Cache-data and proceed,

press Y:.

Ta b l e 1 3 - 2 . B I O S B o o t E r r o r M e s s a g e s

(continued)

Message

Problem