Boot menu – NEXCOM MRC 2200 User Manual

Page 60

Chapter 6: Using BIOS Setup and System

MRC 2200 User Manual

South Bridge Configuration:
Select the options to support USB functions.

USB Configuration:
This setting allows you to enable/disable the onboard USB controller. Set
the value of USB Function to allow the system to enable or disable the
onboard USB ports.

Boot Menu

Boot Settings

Boot Device Priority:
Set the boot device options to determine the sequence in which the com-
puter checks which device to boot from. The settings are Removable Dev.,
Hard Drive, or ATAPI CDROM. The Optimal and Fail-Safe settings are:

1st boot device – Removable Device

2nd boot device – ATAPI CDROM

3rd boot device –Hard Drive

Note: Hard Drive must be configured as 1st boot device to boot
up. If there are changes to hard drive, the boot device will be
set to “None”.

Hard Disk Drives:
Display the Hard Disk information connected to the system.