Advanced menu – NEXCOM MRC 2200 User Manual

Page 59

Chapter 6: Using BIOS Setup and System

MRC 2200 User Manual

System Overview

AMIBIOS:
Display the version of the current Bios

Processor:
Display the current process information

System Memory:
Display the system memory size

System Time/System Date:
Use this option to change the system time and date. Highlight System
Time or System Date using the keys. Enter new values through
the keyboard. Press the key or the keys to move between
fields. The date must be entered in MM/DD/YY format. The time is entered
in HH:MM:SS format.

Advanced Menu

Select the Advanced tab from the setup screen to enter the Advanced
BIOS Setup screen.

You can select any of the items in the left frame of the screen, such as
CPU Configuration, to go to the sub menu for that item. You can display
an Advanced BIOS Setup option by highlighting it using the keys.
The Advanced BIOS Setup screen is shown below.

Advanced Settings

CPU Configuration:
You can use this screen to select options for advanced CPU Configuration
Settings. Use the up and down keys to select an item. Use the
and keys to change the value of the selected option.

IDE Configuration:
Your computer has two IDE channels (Primary and Secondary) and each
channel can be installed with one or two devices (Master and Slave). Use
these items to configure each device on the IDE channel.

Backlight Configuration:
Select the options to enable/disable auto backlight sensor.