NEXCOM MRC 2200 User Manual

Page 41

Chapter 3: Operating Your Tablet PC

MRC 2200 User Manual

GPS Information Instructions

Make sure that the GPS device is properly inserted.

Start GPS Information Software.

Choose and select the proper communication port. (It might be neces-
sary to try each available port to find the right one since the default
communication port varies according to different hardware device.)

Click “Start GPS button” to activate the GPS receiver.

Upon successful connection, GPS output data should be displayed in
“Main GPS data Window”. If no data is observed, make sure the GPS
receiver is working and properly inserted. Otherwise choose another
communication port.

Satellite status can be observed in the “GPS Info Window”. Use the
“Tab Menu” to switch between Setup window and GPS info window.

Please make sure to de-activate the GPS device before exiting this pro-
gram.

Using the 3.5G Feature (Optional)

3.5G is a 3G mobile telephony communications protocol in the High-
Speed Packet Access (HSPA) family. It allows networks based on Universal
Mobile Telecommunications System (UMTS) to have higher data transfer
speeds and capacity.
To use the 3G feature on your tablet PC, you need to install the 3G SIM
card, subscribe 3G service from your service provider, or network operator.

Note: To install the SIM card, refer to Inserting SIM card section
in Chapter 2.