NEXCOM MRC 2200 User Manual

Page 52

Text mode
Original mode

Chapter 4: Managing Power

MRC 2200 User Manual

External Battery Charger

The external battery charger allows you to charge your spare batteries
while another one is in use. It takes approximately 3 hours to charge a fully
depleted battery. With the WiFi disabled and the LCD panel’s brightness
reduced, the battery can last for 4 hours.
1. The 4 slots on the external battery charger allows charging 4 batteries.

Power cord

3. Plug the AC power cord into the nearest electrical outlet and then plug

the other end to the battery charger’s DC jack located at the rear of the
battery charger.

2. Insert the battery onto the charger. The battery will only fit one way and

easily plugs into place as shown.

Batteries

4. Green light indicates the battery is fully charged.
Orange light indicates the battery is charging.