NEXCOM NEX 611 - Manual (Page 43)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 32
Chapter 3: Uefi Setup Utility
NEX 611 User Manual
3.3.4 Storage Configuration
SATA Controller
Use this to enable or disable the SATA Controller.
SATA Mode
Use this to select the SATA mode for SATA3_1 to SATA3_4 ports.
Configuration options: [IDE Mode], [AHCI Mode] and [RAID Mode].
The default value is [IDE Mode]. (Raid is not supported by AMD A50M)
SATA IDE Combined Mode
Use this to enable or disable SATA IDE combined mode.
Hard Disk S.M.A.R.T.
Use this to enable or disable S.M.A.R.T. (Self-Monitoring, Analysis, and
Reporting Technology).
Exit Advanced Chipset PCIPnP Security Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save & Exit
F12: Print Screen
ESC: Exit
Enable or Disabled
SATA Controller
SATA Controller(s)
SATA Mode
SATA IDE Combined Mode
Hard Disk S.M.A.R.T
SATA3_1 :Not Detected
SATA3_2 :Not Detected
SATA3_3 :Not Detected
SATA3_4 :Not Detected
M_SATA1 :Not Detected
[Enabled]
[IDE Mode]
[Enabled]
[Disabled]