NEXCOM NEX 611 User Manual

Page 36

Chapter 2: Installation

NEX 611 User Manual

How to Hot Plug/ Hot Swap a HDD:

Please follow the instructions below to process Hot Plug/ Hot Swap.
Improper procedures will cause the HDD damage and data loss.

Connect the SATA 15-pin
power cable connector’s
(Black) end to the HDD.

Connect the SATA data
cable to the HDD.

Please connect the SATA power
cable’s 1x4-pin end (White)
to the power supply’s 1x4-pin
cable.

Connect the SATA data
cable to the motherboard’s
SATA connector.

SATA power cable
1x4-pin power
connector (White)

How to Hot Unplug/ Hot Swap a HDD:

Please follow the instructions below to process Hot Unplug/ Hot Swap.
Improper procedures will cause the HDD damage and data loss.

Unplug the SATA data cable from the HDD’s side.

Unplug the SATA 15-pin power cable connector (Black) from the
HDD's side.

Step 1

Step 2

Step 3

Step 4