NEXCOM NEX 611 User Manual

Page 35

Chapter 2: Installation

NEX 611 User Manual

Points for attention, before you process Hot Plug/ Hot Swap:

Without the SATA 15-pin power connector interface, Hot Plug / Hot
Swap cannot be processed.

Even though some HDDs provide both SATA 15-pin power connectors
and IDE 1x4-pin conventional power connectors, IDE 1x4-pin conven-
tional power connector’s interface is definitely unable to support Hot
Plug / Hot Swap and will cause the HDD damage and data loss.

The operation procedure below is designed only for our motherboard
which supports Hot Plug / Hot Swap.
* Hot Plug / Hot Swap might not be supported by the chipset because
of its limitation. The support information of our motherboards are
indicated in the product spec on our website: www.nexcom.com

Make sure your HDDs can support Hot Plug / Hot Swap from your dealer
or HDD user manual. HDDs that do not support Hot Plug / Hot Swap will
be damaged.

Please make sure that the required SATA drivers are installed properly.
The latest SATA drivers are available on our support website:
www.nexcom.com

Make sure to use the SATA power cable & data cable from our
motherboard package.

Please follow the instructions below step by step to reduce the
risk of HDD crash or data loss.