Dan Dugan Sound Design E-2 - Manual (Page 43)

Dugan Model E-2 User Guide Dugan Control Panel Software
43
Figure 5-7 Channels in three groups
Override
Override can be used to instantly mute all mics except one (the host or chairperson).
However, any number of mics can be included in the override group. It can thus be
used to make a dramatic A/B comparison between automatic and conventional mixing.
To assign channels to an override group, activate the override button on each channel.
Pressing the Master section OVERRIDE button puts channels with their override buttons
lit into man mode. All other channels are muted. Press the OVERRIDE button again to
restore normal automixing operation.
Meters
The meters have three display modes.
Table 5-1 Meter modes
The default meter display is auto mix gain . This is the most useful choice during normal
operation; the input and output meters are only used when setting or checking levels.
Click on the Master meters button to toggle through the three meter display modes.
Meter Displays Meter Color
auto mix gain action of the Dugan Speech System green
input input level yellow
output output level blue