Dan Dugan Sound Design E-2 - Manual (Page 19)

Dugan Model E-2 User Guide Installation and Configuration
19
Rear Panel I/O Connections
The Model E-2 provides the following rear panel I/O connectors:
• AUDIO I/O 1–4
• AUDIO I/O 5–8
• AUDIO I/O 9–12
Each DB25 connector carries four input and four output analog channels. All an-
alog audio connections are balanced.
To connect with XLR connectors, use readily available adapter squids. Although
the Model E-2 uses these connectors for analog I/O, they are wired according to
the TASCAM digital standard.
• AUD IN, AUD OUT
These ADAT connectors carry eight audio I/O channels.
• LINK IN, LINK OUT
These ADAT connectors carry proprietary linking data. They can also be re-assigned
as eight additional audio channels.
• CP-2 CONTROL PANEL
This carries RS422 data to and from the Model CP-2 Control Panel.
Figure 3-2 Model E-2 rear panel I/O connectors